Omega Machinery

Mostrando 721–726 de 726 resultados

  • Vertical 12″ 1 Side Curve Sander OM-SD-VC121S

    Features:

    • Capable of sanding relatively heavier weight or more intricate curved products.
    • Spring-load feed roll tension to automatically adjust the sanding distance for variation at workpiece width.
    • Sanding is semi-automatic feeding the workpiece by AC motor, drives feed roll smoothly for faster production.
    • Feed speed is infinitely variable speed adjusted for best finish results.
    • Easy adjustable sand belt tension device.
    • Feed drum is movable that enables this series of sanders especially suited for sanding inside hollow products, such as round rings, ellipse rings, etc.
    • Available with sponge drums by hardness 10º ~ 15º.
    • Sponge drum may be replaced with a brush wheel for thoroughly cleaning burrs and fine finish sanding surfaces.
    • Sponge drum can also be replaced with an air or rubber drum for heavy sanding operations.
    • Powerful industrial motor for durability usage.
    • Heavy sheet metal cabinet stand.
    Vista rápida
    loading
  • Vertical 6″ 1 Side Curve Sander OM-SD-VC061S

    Features:

    • Capable of sanding relatively heavier weight or more intricate curved products.
    • Spring-load feed roll tension to automatically adjust the sanding distance for variation at workpiece width.
    • Sanding is semi-automatic feeding the workpiece by AC motor, drives feed roll smoothly for faster production.
    • Feed speed is infinitely variable speed adjusted for best finish results.
    • Easy adjustable sand belt tension device.
    • Feed drum is movable that enables this series of sanders especially suited for sanding inside hollow products, such as round rings, ellipse rings, etc.
    • Available with sponge drums by hardness 10º ~ 15º.
    • Sponge drum may be replaced with a brush wheel for thoroughly cleaning burrs and fine finish sanding surfaces.
    • Sponge drum can also be replaced with an air or rubber drum for heavy sanding operations.
    • Powerful industrial motor for durability usage.
    • Heavy sheet metal cabinet stand.
    Vista rápida
    loading
  • Vertical Door Loader & Off-Loader (Prehung Door Machinery) OM-DT-525

    Using the DT-525 Vertical Door Loader & Off-Loader at the end of the machining functions on the door, allows for the door to be unloaded and loaded on a pallet or door cart.

    With the flip of a switch, the loader will change functions and allow the door exiting from the vertical door position be re-stacked (jambs cannot be attached).

    Features Include:

    • Adjustable air clamping for light or heavy doors.
    • Safety warning light when machine operates.
    • Guarded mechanical areas for safety.
    • Steel surfaces covered w/anti-marking materials.
    • Easy access to electrical control panel.
    • Air nozzle and hose for cleaning doors.
    • Swing away operator control panel.
    • Emergency stop arm.
    • Automatic door lifting and positioning.
    • Small shop foot print.
    • Will work with most vertical door machines.
    • Will load doors with raised moulding on both sides.
    • Doors with raised moulding two sides.
    • Doors from 18″ – 48″ wide.
    • Doors up to 108″ in length.
    • 1 3/8″ to 2 1/4″ thick doors.
    • Doors up to 250 lbs.
    • Re-stacking door capability.
    Vista rápida
    loading
  • Vertical Spindle, Belt, Brush Sander OM-SD-VS300

    Features:

    • Ideal for sanding contour edges, such as chair seats, round plates, etc.
    • Table may be tilted up to 45º for angular edge sanding.
    • Available with sponge drums by hardness 10º ~ 15º.
    • Easy adjustable sand belt tension device.
    • Sponge drum may be replaced with a brush wheel for thoroughly cleaning burrs, and fine finish sanded surfaces.
    • Sponge drum can also be replaced with an air or roller drum for spindle sanding operations.
    • Table height can be adjusted for different sanding belt area.
    • Powerful industrial motor for durability usage.
    • Heavy sheet metal cabinet stand.
    Vista rápida
    loading
  • Vertical Spindle, Belt, Brush Sander OM-SD-VS300

    Features:

    • Ideal for sanding contour edges, such as chair seats, round plates, etc.
    • Table may be tilted up to 45º for angular edge sanding.
    • Available with sponge drums by hardness 10º ~ 15º.
    • Easy adjustable sand belt tension device.
    • Sponge drum may be replaced with a brush wheel for thoroughly cleaning burrs, and fine finish sanded surfaces.
    • Sponge drum can also be replaced with an air or roller drum for spindle sanding operations.
    • Table height can be adjusted for different sanding belt area.
    • Powerful industrial motor for durability usage.
    • Heavy sheet metal cabinet stand.
    Vista rápida
    loading
  • Viking X-Y Door Lite Machine (Prehung Door Machinery) OM-DT-600

    Standard Features:

    • Lite cutting, lock boring, latch boring and faceplate routing.
    • Will machine a 8-0 x 3-6 door. Wood, Fiberglass or Steel.
    • Adjust the Viking to the width of the incoming door, by pushing a couple of buttons.  Automatically width indexes or can be pre-programmed for standard widths saving the operator time and helping to eliminate mistakes.
    • XY controls eliminates the need for templates when cutting square or rectangle door lites. Quick change stop system, no need for extra bars.
    • For round or oval lites, use a template that sites above the door.- No scratches or dents from the template being placed directly on the door.
    • Adjustable RPM speed control accommodates both wood/fiberglass and metal cutting.- Giving a better cut and improving the life fo the door lite bit.
    • Oscillating quill – Improves the life of the door lite bit and quality of the cut.
    • Throughfeeding, which allows for less handing and less chance for damage to the door.

     Options:

    • Waste bin.
    • Dust collection systems.
    • Spare parts and extra bit packages.
    Vista rápida
    loading