Precision Husky

Mostrando todos los resultados 11

  • Astilladora KWIK-CHIP

    Vista rápida
    loading
  • Astilladora ROUNDWOOD

    WORLD LEADER IN PERFORMANCE, DURABILITY AND INSTALLATIONS
    ENGINEERED FOR PERFORMANCE – BUILT FOR ENDURANCE

    TRUE SLICING ACTION

    Precision’s spout design with a flat bottom and canted side gives 25% more anvil contact with the log. This provides absolute control of the log, preventing slapping and wood turning. Both horizontal and vertical anvils give additional life with less maintenance. Both are hard surfaced with colmonoy which has a hardness of 62 to 65 on the Rockwell C scale.

    SPECIFICATIONS

    TAMAÑO ASTILLADORA

    75 ”   [190 cm]

    84 “[213cm]

    96 “[244 cm]

    112 “[284cm]

    118 “[300 cm]

    RPM del disco

    560

    510

    450

    360

    327

    Número de cuchillas

    3-8

    3-8

    4-10

    6-10

    6-12

    libras de peso aproximados. [kg]

    15.000 [6804kg]

    24.500 [11,113kg]

    33.100 [15,014kg]

    44.200 [20,049kg]

    52.000 [23,587kg]

    Espesor de Disc

    5 7/8 “[149 mm]

    5 7/8 “[149 mm]

    5 7/8 “[149 mm]

    6 7/8 “[175 mm]

    6 7/8 “[175 mm]

    Producción (Ton / hr.) *

    125 [113Mt]

    175 [159mt]

    250 [227mt]

    300 [272mt]

    350 [318mt]

    * Production average based on maximum number of knives and 3/4″ [19mm] chip.

    FEED
    Horizontal and / or Drop
    DISCHARGE
    Top, bottom, end or back
    RECHIPPER SPOUTS
    8″ x 8″ [203mm x 203mm] , 10″ x 10″ [254mm x 254mm]or 15″ x 15″ [381 x 381mm]
    Vee Bottom Rechipper Spouts
    DISC BRAKE
    HYDRAULIC HOOD OPENER
    HEAVY-DUTY PACKAGE
    DISSIPATOR FOR REAR DISCHARGE

    Vista rápida
    loading
  • Astilladora WASTE WOOD

    Options for 38″ [96cm], 48″ [122cm], 58″ [147cm] and 66″ [168cm] Precision Chippers

    Dissipator for rear discharge
    The circular movements of the chips greatly reduce the force of the chip flow and chips are spread more evenly. Available for all four chipper sizes. Cyclone sizes from 4′ to 8′ [1.2m to 2.4m] in diameter.

    OPTIONS:
    Horizontal Feed or Drop Feed Left or Right
    Discharge – Top, bottom, end or back 360 deg. Swivel discharge for trailer loading.

    SLICING INSTEAD OF CHOPPING

    The canted side spout design and the position of the knife causes a smooth slicing action. The attack angle of the knife gives a gentle lift to the slab as the knife passes the center line and begins the upward swing turning the slab counterclockwise. The spout has a flat bottom and canted side to give 25 % more anvil contact, preventing slapping and wood turning in the wrong direction. Horizontal and vertical anvils give additional life, requiring less maintenance. Both anvils are hard surfaced with Colmonoy with a hardness of 62 – 65, Rockwell C scale. With a four sided replaceable anvil, maintenance and time are saved. Less horsepower is needed with Precision’s smoother action.

    Vista rápida
    loading
  • BARK CONVEYOR

    Economical, self-contained unit easily adapted to existing debarking systems, eliminating down time. Used successfully under debarkers, edgers and hogs to remove bark. This bark conveyor is often called a barnsweep.

    RUGGEDLY BUILT – TO LAST

    Standard equipment includes total enclosed, fan cooled (TEFC) with shaft mounted reducer. Allows top performance with lower horsepower than those using sprockets.

    The rugged heavy-duty chain is hardened alloy for years of trouble free service.

    Vista rápida
    loading
  • CRIBA VIBRATORIA PARA CLASIFICACIÓN DE ASTILLA HV-1020


    Especificaciones

    Superficie útil de la criba10’ x 20’
    Potencia del motor15 hp
    Velocidad de rotación de la criba300 rpm
    Producción aproximada en volumen82 unidades por hora (16,400 pies3/hr)
    Producción aproximada en peso 150 tons/hr
    Peso aproximado del equipo8,700 kgs

     

    Vista rápida
    loading
  • Descortezador tipo Rosserhead

    Vista rápida
    loading
  • DISC SCALPING SCREEN

    Precision’s Disc Scalping Screen is designed to function as both a high-volume material classifier and conveyor. It accomplishes this by using multiple rotating shaft assemblies.

    As material is fed onto these special rotating shaft assemblies, it is conveyed, agitated and classified. The oversized material is conveyed over the end of the scalper screen and the acceptable material is dropped between the factory spaced rotating discs. These shaft assemblies consist of the shaft and multiple discs. Consecutive shaft assemblies have discs which interface with each other, at a pre-set opening.

    STANDARD EQUIPMENT SPECIFICATIONS
    Drive:5 HP [3.7kw] , 1800 RPM, TEFC 230/460 volt motor, Dodge shaft mounted gear reducer with 84 RPM output.
    6 Roller
    Assemblies:
    Discs on rollers are abrasion resistant steel.
    Outside diameter of rollers is 13 1/2″ [343mm] .
    Bearings:Dodge SC 2 7/16″ [62mm] 4-bolt flanged ball bearings.
    Dimensions:93 5/8″ [2380mm] long x 81 3/4″ [2075mm] wide x 38″ [965mm] high.
    Weight:Approximately 3750 Lbs. [1705kg]
    Options:Disc spacings in the PDS -648 to suit customer’s
    specifications – consult factory.

     

    Vista rápida
    loading
  • LIVE DECK

    Weighing nearly four tons, the ruggedly-built Precision Live Deck is engineered and built to give years of trouble-free service with minimum maintenance.

    Drive shown is worm gear reducer with hydraulic motor. Optional electric motor and worm gear reducer available.

    • The stop and loader is operated by a 6″ [152mm] bore by 10″ [254mm] stroke air cylinder. Runners are 4″ [102mm] x 10″ [254mm] x 3/8″ [10mm]
    • Tail sprockets are adjustable for tightening chain.
    • To save wear on chains, welded channel runners have metal wear strips or optional oak liners. Chain returns inside on runners
    • 2′ [61cm] legs are standard, longer legs are optional.
    Vista rápida
    loading
  • ROTARY KNIFE GRINDER

    Precision Rotary Knife Grinder’s anti-friction bearings with continuous circular grinding eliminates the reversal vibration shock commonly experienced in reciprocating grinders. Any size knife can be ground from 3/16″ [5mm] to 1 1/4″ [32mm] thick and knife width’s from 2″ [50mm] to 6″ [150mm]. Accommodates knives from 5″ [127mm] to 28″ [710mm] long.

    The low height of this compact grinder makes loading and unloading knives easier. Precision Rotary Knife Grinder is complete, ready to use with diamond wheel dresser, bevel gauge for setting fixtures, coolant pump and tank, and all motors and starters.

    All controls are housed in a NEMA #12 water tight control box. The operational controls are mounted on the side of the control panel for additional safety. An electrical lock out utilizing a key prohibits any motor function during loading or maintenance.

    STANDARD EQUIPMENT:
    • 5 HP [3.7kw] grinding wheel, totally enclosed, fan cooled (TEFC)
      motor, 3-phase available as an option.
    • 3/4 HP [.56kw] motor for driving table
    • Diamond wheel dresser
    • Bevel gauge for setting fixtures
    • 3-Knife fixtures will accommodate up to three 28″ [710mm] knives
    • 4-Knife fixtures will accommodate up to four 23″ [585mm] knives
    • 6-Knife fixtures will accommodate up to six 21 1/2″ [545mm] knives
    • Knife width maximum 5″ [127mm]
    Vista rápida
    loading
  • SAWMILL CHIP SCREEN

    Precision “Fixed-Rotary” Chip Screens incorporates proven engineering features to assure long-life performance with consistent high quality production. The smooth glide of the fixed rotary counter weight from the balanced center axis of the drive unit, provides year after year of high performance with a minimum of maintenance.

    The low profile receiving pan is additional assurance that your Precision “Fixed-Rotary” Chip Screens will meet the most demanding requirements of any chip specifications.

    Chip screens are suspended from frame, with 1 1⁄4″ [32mm] stress proof hanger rods with rod end bearings.

    Hanger rods are available with universal joints as an option.

     

    Vista rápida
    loading
  • VIBRATING CONVEYOR

    Main frame for the heavy-duty unit is made from 6″ [152mm] channel at 16.3 lbs. [7.4kg] per foot. The Vibrating Conveyor’s energy is transferred through the heavy-duty fiberglass bars to the heavy-duty channel. This secure footing reduces maintenance and insures long life. Shown in heavy-duty. Medium duty series are available for lighter applications.

    All components are heavy-duty as the spherical roller bearings used in the drive section. Motor under the conveyor gives added protection. Unit shown is complete with spout transition, motor and drive.

    Sawdust removal screen only permits blocks, slabs and edgings to enter chipper, increasing chipper blade effectiveness and reducing dust. A 5 foot [1.5m] fiberglass section is also available for use with metal detectors. Unit shown is right hand discharge. Left, bottom or right discharge must be specified by user.

    Vista rápida
    loading