1 Cutter. 1 Sand Belt. 1 Sand Wheel, Shape & Sand OM-CS-1C1B1S

Comparar
SKU: OM-CS-1C1B1S Categorías: , ,

Descripción

Features:

  • Designed for high production shaping and sanding of straight stock of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
  • Workpiece is through feed with rubber pad conveyor and spring-load pressure rolls at top, without sliding.
  • Extra slide side rolls extension table up to three feet for larger material supporting.
  • Sanding head can be adjusted forward & backward, up & down and tilt – 45 to + 90 degrees.
  • Variable sanding belt speeds 0 ~ 3600 RPM for the best finish result.
  • Automatic control jumping sanding head stroke design for not round over the front and end of material.
  • Variable feeding conveyor 10’ to 136’ to get different setup easily.
  • Sanding belt tension mechanism is self-balance designed, it maintains proper tension at all the time, that not only provides steady belt pressure but extends belt service life.
  • Constant sanding pressure is pneumatic cylinder controlled to achieve uniform and superior finish.
  • Air blower actives clean and cool down the sanding belt.
  • Industrial powerful shaper motor for best cutting capacity.
  • Shaper spindle can be adjusted up & down, in & out with 9000-RPM speed.
  • Extra sanding head can be used with profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.
SPECIFICATIONS
Profile Platen Belt HeadWheel, Belt Head
Range of Workpiece Width2″ ~ 70″Brush Wheel Drive Motor2 HP
Minimum Length of Workpiece4″Brush Tilts+90° ~ 180°
Range of Workpiece Thickness1/6″ ~ 4″Sanding Belt3″ x 20″
Sanding Belt Width1″ ~ 4″Sanding Wheel Dia. Max8″
Sanding Belt Length98″Sanding Spindle Dia.1″
Belt Tilts-45° ~ +90°Spindle Speed0 ~ 3600 RPM
Belt Drive Motor2 HPShaper Head
Sanding Belt Speed0 ~ 2400 FPMShaper Motor7-1/2 HP
Profile Head Stroke0 ~ 3″Shaper Speed6000/8000 RPM
Sanding Pressure1 ~ 5 LBSShaper Spindle Dia.1-1/4″
Shaper Spindle Length6″
Max. Cutter Dia.8″