The TITAN Automated Edger uses optical scanning technology to achieve high precision and low waste edging of boards. The entire edging process is automated. First, each board is scanned. The profile of each board is then analysed by a computer, which decides on the best product to maximize recovery. Decisions are based on both volume recovery and product value. After scanning, the boards pass through an alignment station and then are sawn.
The V-AE is capable of handling up to 25 boards per minute and is the ideal machine to edge boards coming from the TITAN Resaw. Electric servo sizing system achieves any width of cut without complication.
Parallel PLC / computer control systems allow the machine to be switched over to manual mode with a single button. Online support allows our technicians to dial into your machine to troubleshoot it remotely.
Overall, the TITAN Automated Edger is a simple, robust and automated solution to your edging needs.
• Optical scanning on the run
• Easy to use windows interface
• Mechanised material handling for fast, accurate board alignment
|Throat width||500mm (max material width)|
|Cutting width||Min – 40mm; Max – 300mm (customizable up to 500mm)|
|Material thickness||Min – 19mm; Max – 45mm|
|Blade diameter||300mm – 320mm|
|Blade kerf||3 – 5mm|
|Main saw motors||22kW or 30kW (29.5HP or 40.2HP)|
|Feed motor & gearbox||10kW (13.4HP)|
|Feed speed||Hydraulic driven traversing head|
|Feed speed||0 – 140m/min|
|Piece Count||0 – 25 boards/min (length dependant)|
|Sizing method||Electric servo sizing system
Optical scanner controlled
Automated board allignment
|Scanning method||Computer controlled optical scanner|
|Hold downs||Driven pneumatic hold downs|
|Options||In-line or transverse board scanning|